ROGERS INOAC CORPORATION

Close

MS-40

Print

Physical Properties / Product Availability

Feature MS is a similar hardness to the LT type in the Standard series. It is one of the softest materials among this series, allowing for production of very thin products.
Density 400kg/m3 
Tensile strength 0.51MPa 
Elongation 130% 
Tear strength 2.1N/mm 
25%CLD 0.06MPa 
圧縮残留歪 3.0% 
Size(Thickness×Width×Length)
  • Standard0.9mm 500mm 50M
  • Standard1.0mm 500mm 50M
  • Made to Order1.2mm 500mm 50M
  • Standard1.5mm 500mm 50M難燃タイプ
  • Standard2.0mm 500mm 50M難燃タイプ
  • Made to Order3.0mm 500mm 50M難燃タイプ
  • Made to Order4.0mm 500mm 40M
Standard color Black

※About icons

  • StandardStandard
  • Semi-StandardSemi-Standard Products (1roll/lot)
  • Made to OrderProduct Made to Order (500m2 lots)
  • Made to OrderProduct Made to Order (300m2 lots)
  • Made to OrderProduct Made to Order (250m2 lots)
  • Made to OrderProduct Made to Order (200sheets lots)

※The figures all indicate representative values.
※The measurement method is our test method based on JIS standard.

PDF Download