Standard Series (TL)

The standard NanNex product.

  • TL4400
    4401
    4402
    4403

    The standard type available in four colors.

  • TL4700

    A super soft type which is the softest of the Standard Series and has a maximum thickness of 8.0 mm.

  • TL3503

    A highly flame-retardant, soft type which passes UL94 V-0 for all thicknesses.

  • TL3503VT

    A type acrylic adhesived by special surface treatment to TL3503,highly flame-retardant, soft type which passes UL94 V-0

Physical Properties / Product Availability

PDFThickness Chart by Flammability Standards?How to use the chart
TypeThickness
(mm)
StandardHardnessColorDensity
(JIS K 6401)
Tensile strength
(JIS K 6251)
Elongation
(JIS K 6251)
Tear strength
(JIS K 6252)
25%
CLD
(JIS K 6254)
Compression
set
(JIS K 6401)
TL44001.0~6.0FMVSS 302
UL-94 V-0
Normal270kg/m30.38MPa60%-0.056MPa5.0%
TL44011.0~6.0FMVSS 302
UL-94 V-0
Normalオレンジ270kg/m30.38MPa60%-0.056MPa5.0%
TL44021.0~3.0FMVSS 302Normalグレー270kg/m30.38MPa60%-0.056MPa5.0%
TL44031.0~3.0FMVSS 302Normal270kg/m30.38MPa60%-0.056MPa5.0%
TL47003.0~8.0FMVSS 302Soft180kg/m30.19MPa48%-0.028MPa5.0%
TL35031.0~6.0ASTM E162
ASTM E662
BSS 7239
EN 45545-2
FAR 25.853
FMVSS 302
UL-94 V-0
Normal260kg/m30.32MPa70%-0.036MPa6.0%
TL3503VT1.0~6.0ASTM E162
ASTM E662
BSS 7239
EN 45545-2
FAR 25.853
FMVSS 302
UL-94 V-0
Normal260kg/m30.32MPa70%-0.036MPa6.0%

※The figures all indicate representative values.
※The *1 mark of 25% compressive load is 40% compressive load, the *2 mark is 10% compressive load and the *3 mark is 50% compressive load
※The *4 mark of compression set is a measurement taken using a test method with a 25% compression rate.

For more detailed product data, please place a request via our online inquiry form.

Series

TOPへ