ROGERS INOAC CORPORATION
Japanese English Simplified Chinese Traditional Chinese Korean
ABOUT USPRODUCTSSUPPORTGALLERRYCONTACT US
PRODUCTS
Microcellular Polymer Sheets PORON®
Noncombustible Silicone Sheets NanNex
Application NAVI
PORON® : Handheld
PORON® : Imaging
PORON® : Foot Pad
PORON®/NanNex : Automotive
 
Application NAVI PORON® Imaging
PORON® Imaging
HOME > Application NAVI > PORON® Imaging PORON® Imaging
PORON® Imaging products provide the characteristics of high reliability, including superior sealing, vibration-damping and impact-absorbing properties. With these advantages, the products can support the various internal components of imaging products.
Now, new types and grades of products have been developed, such as the types with optimal features for the use for toner seals, and the grades that incorporate both high performance and environment friendliness. These new variations offer the base to support any imaging devices such as printers, photocopiers, facsimiles, scanners, etc.
Basic characteristics of Microcellular polymer sheets PORON®
Low compression set
Low compression set
PORON® has very low compression set.
High sealability
High sealability
PORON® provides high sealing performance.
Excellent energy absorption
Excellent
PORON® offers excellent impact absorption.
No migration
No migration
PORON® has very no migration effect on other materials.
High dimensional stability
High dimensional stability
PORON® provides excellent dimensional stability.
High fabricaing efficiency
High fabricaing efficiency
PORON® is a material with high fabricating efficiency.
Multi Function Printer

Flash
HTML
Page Top
Standard series
The Standard series consists of various products with a wide, well-balanced combination of hardness and density. This series reliably meets the needs of a wide range of internal components, including toner seals and other components that require vibration isolation and shock absorption. Physical Properties/Product Availability
LE
LE is the softest product in the standard series. With its low stress property and compressibility, this type has been widely used for toner seals.
L
L is a softer product in the standard series, being used for a wide range of cushioning and packing materials.
H
H is a hard product in the standard series. This type offers a high physical strength, being used as sealing materials or vibration dumping materials.
HH
HH is a harder product, primarily being used for the foot pads of audio devices, home electric appliances and office appliances. The C type that has excellent gripping property is also available.
This is a hard and flame-resistance product that has acquired UL94HBF certification. Primarily used for the foot pads in home appliances, etc. that require fire resistance.
Page Top
LO/FR series
Little gas generation and high flame resistance (conformable to UL94 HBF) by using non-halogen-based materials, complying with the requirements for safety and environments. Physical Properties/Product Availability
MS
MS is a product similar to the LE type in the Standard series. It is one of the softest materials among the LO/FR series, allowing for production of very thin products.
ML
ML is a soft material similar to the L type in the Standard series.
MH
MH is a hard material similar to the H type in the Standard series.
Food Pad series
Foot Pad series is produced based on a comparably high hardness grade. The products are usually used as excellent for foot pads. Physical Properties/Product Availability
H
This is a hard type of material with a good overall balance.
HH
HH, a super hard type, is very hard and provides very high load bearing capability.
MX
This is the hardest material among the Food Pad series products, offering the load bearing property equivalent to that of solid materials. It also provides excellent gripping forces due to the HF coating.
Coating series
The Coating series offers a slippery surface through a special surface treatment, while maintaining the existing high performance characteristics of PORON®. Physical Properties/Product Availability
LE-20LF
LE-20LF is a material produced by applying a special surface treatment to the LE type of the Standard series. This product provides improved levels of surface slip characteristics, water proofness and non-adhesiveness, and also excels in preventing friction noises.
MS-40T
This material is produced by applying a special surface treatment to LO/FR Series Type MS-40. This product combines outstanding flexibility with high surface strength.
Page Top
PORON® is a licensed trademark of ROGERS CORPORATION. Copyright(c) 2004 ROGERS INOAC CORPORATION all right reserved. Site map