 |
|
 |
| PORON® Automotive products facilitate to provide an ideal driving environment by offering a variety of materials for sealing and packing used for the instrument panel, navigation & AV system and glove box. |
 |
|
 |
 |
| PORON® has very low compression set. |
|
|
 |
 |
| PORON® provides high sealing performance. |
|
|
|
 |
 |
| PORON® offers excellent impact absorption. |
|
|
 |
 |
| PORON® has very no migration effect on other materials. |
|
|
|
 |
 |
| PORON® provides excellent dimensional stability. |
|
|
 |
 |
| PORON® is a material with high fabricating efficiency. |
|
|
|
|
|
 |
| NanNex Automotive is silicone foam with the heat and weather resistant properties required for use in car parts. It guaranties to provide optimal characteristics for parts in the engine compartment and the car's exterior, and also to enhance design flexibility. |
 |
|
|
|
| NanNex has very low compression set. |
|
|
 |
 |
| NanNex offers excellent heat and cold resistance. |
|
|
|
 |
 |
| NanNex offers excellent weather resistance. |
|
|
 |
 |
| NanNex offers superior flame resistance. |
|
|
|
 |
 |
| Long-size and/or composite products can be developed. |
|
|
|
|
|
|
 |
 |
 |
|
 |
| SR-S, produced by integrally molding PET film and SR compound that offers low resilience, is a material with proper softness and rigidity. |
  |
|
 |
| ASRS is a material to which antistatic characteristics have been added. It inherits SR-S's superior characteristics such as low resilience, thinness, as well as rigidity that comes from the integral molding with PET. ASRS is suited for the use in products that need to prevent static electricity. |
 |
|
 |
| Slow-rebound, flame retardant type is also available complying with UL 94 HBF. |
 |
|
 |
| SS is a new grade material that features the same hardness as the SR-S type, while retaining the same level of resilience as the PORON® Standard series. |
  |
|
 |
 |
|
|
 |
| MS is a product similar to the LE type in the standard series. It is one of the softest materials among the LO/FR series, allowing for creation of very thin products. |
|
 |
| ML is a soft material similar to the L type in the standard series. |
 |
| MH is a hard material similar to the H type in the Standard series. |
|
 |
 |
|
|
 |
| LE is the softest product in the standard series. With its low stress property and compressibility, this type has been widely used for toner seals. |
|
 |
| L is a softer product in the standard series, being used for a wide range of cushioning and packing materials. |
|
 |
| H is a hard product in the standard series. This type offers a high physical strength, being used as sealing materials or vibration proofing materials. |
 |
|
|
 |
|
|
 |
| TL4400 Series has a thickness variation of 1.0 to 8.0mm, offering 4 colors and 5 grades of hardness. TL4400(Thickness 6.0mm or more), TL4401(Thickness 1.5mm
or more) has passed the UL94 V-0 test. |
|
 |
|
|
 |
BF Series is a standard silicone foam.
It is available in a thickness range from 1.6 to 25.4mm.
Thicknesses of 1.6mm and greater have passed the UL94 V-0 test. |
|
 |
HT series is available in three grades of hardness as usage.
Thickness can be selected from 0.8mm.
All standard of HT Series products are UL94 V-0 approved. |
|
|
 |
|
|
 |
BF-1000 with aluminum-based fabric
RF Series is a product manufactured by integrally molding aluminum-based fabric onto its one side, demonstrating an effective resistance and insulation against radiant heat. |
|
 |
BF-1000 with on fiberglass
IF Series is the type of material with glass wool-based fabric integrally molded onto its one side, resulting in higher physical strength and improved adhesion of other materials onto the processed surface. |
|
 |
|
|
 |
Special silicone foam on fiberglass
FPC series offers high temperature resistance property that prevents the product from melting when it is engulfed in the flames of 1000°C for twenty minuts or more. Even if it should burn, toxic gases are not generated. |
|
|
